Nick Glover

There were a couple articles on other blogs a little while ago about ways to bypass the lengthy voicemail intros many carriers use. You know how it goes: “‘Hi, this is Nick, leave a message after the beep.’ To leave a callback number, press 1. To send a numeric page, press 2.” The articles I read attribute this annoyance to carriers wanting to use up more of your minutes, thus costing you more money, but when you really think about it, that reason doesn’t make any sense. First, that only works with pay-as-you-go plans, which limits how much money they would actually make from it (though I imagine there are still a large number of those users). More importantly, though, is that the carrier with the long voicemail intro is not likely to make any extra money by forcing the annoyance on us. I’m on Verizon, and if I call other Verizon users, I do not use any minutes, so the long intro makes no difference. If I call someone on a different network so that I am actually using minutes, that other network does not get any extra money from me; Verizon is the one that benefits. Not everyone gets to call their own network for free, I suppose, but it seems to me that most of the money made from long intros goes to competing networks, so it would actually be in each carrier’s best interest to shorten the intros. But maybe I’m just missing something.

I seem to be getting a lot of registrations with strange names and no comments, leading me to believe that a lot of my registered users are spam bots. I’ve updated the comments system so that you have to solve a captcha to register. If I deleted your account and you are a real person, I’m sorry, but you’ll have to register again. I’ve also made it so that you don’t have to be registered to comment, though you will have to fill out a captcha every time until you register.

First, you’ll notice that I updated the site to a new theme. Why? I was using an older theme that didn’t support some of the newer WordPress features. Now there should be threaded comments and some other nice things. I still have some things to work out, like making the main column wider, but I have to figure out how first… I think it will require some image modification, which I don’t really feel like doing right now.

Second, Xbox Live has always annoyed me because I always had to call in if I wanted to stop them from charging me for another billing cycle. If, like me, the only time you use Xbox Live is when someone gives you a free month, that gets to be quite annoying. Turns out that it is now possible to stop them from automatically renewing your subscription right from your computer. Go to xbox.com and sign in (or click on your account name at the top if you are already signed in). From there, the easiest way to get where we want to be is to click “Contact Information” next to your avatar. On the next page, click “Membership Level” on the left. Finally, you should see in the middle box on the right a description of your current membership level, including this text: “Automatic renewal: ON.” Just click on “ON” and you are given the option to turn it off. I’m glad they finally allow us to do this.

[part 1 (streaming)] [part 2 (DVD ripping)]

Alright, now we can finally move on to the good stuff: HD DVDs and Blu-rays. I don’t have a Blu-ray drive, so my guide will focus on HD DVDs, but according to this Gizmodo post, the process is basically identical. I’ll point out the differences when we get there, but you can also check the Gizmodo post for help. Personally, since I use my PS3 for movies anyway and HD movies take up a lot of space, I wouldn’t bother ripping Blu-rays.

So why would we want to rip HD DVDs? Well, because it’s a dead format and it seems silly to have a whole extra player hooked up to your TV just to play movies you can’t buy anymore. By putting HD DVDs on your computer, you should be able to free up some space in your entertainment center and, if you were using a standalone player, you will also free up an input on the TV. However, this guide uses the Xbox 360 HD DVD add-on drive, so you’ll need to get a hold of one before we continue. If you are on Windows XP, you may also need additional drivers for the HD DVD drive; Windows Vista and 7 come with everything you need. You’re also going to need a big hard drive (you’ll need about 35 GB or more for each movie) and two programs:

• Slysoft AnyDVD HD, for decrypting the discs and copying them to your computer–this is not free software, but you can download a 21-day free trial, which should be more than enough
• RipBot264, for converting the files into a more usable format–RipBot needs a couple of codec libraries to run, but it’ll tell you where to get them when you run it (if you don’t already have them)

Download everything and install AnyDVD, then run RipBot264 (it doesn’t need to be installed) and get any of the libraries you don’t already have. Before we get started with the ripping process, be warned that it will take a good 12 hours or so per movie. It would take longer if you were following some other guides, but newer versions of the software we are using allow us to skip a lot of those steps. Also, I would again like to stress that you should only be ripping movies that you legally own. Hollywood, please don’t come after me.

Alright, now that that’s all out of the way, grab your HD DVD drive and plug it in to your computer. Windows should start installing drivers for it. Remember, if you are on Windows XP, you will likely need to follow these steps to make sure everything works (AnyDVD might take care of that for you, though, so you might want to just wait and see what happens first). Once everything is installed, pop in an HD DVD. AnyDVD should pop up a little balloon above your taskbar:

It will probably also remind you that you’re using a free trial. Get used to it. That window pops up every time you do anything with AnyDVD. But hey, at least you didn’t have to pay for it, right? When it finishes scanning (it won’t really tell you, but the balloon will disappear and it should only take a couple seconds), open up AnyDVD’s settings so we can make sure everything is set. The first settings panel that shows up will show the status of your optical drives, so you can verify that your HD DVD has been read. Under the “Video HD DVD” section, have everything set like this:

You can probably also have it remove menus and delete script files if you want. I think those are all the default settings because apparently it doesn’t save settings once you exit the program unless you pay for it. Oh well, the defaults are fine. If you are working with Blu-rays, you might want to check the boxes (under the “Video Blu-ray” section) for removing trailers, prohibited user operations, and region codes, though those options are mainly for people copying the disc to another disc and won’t make any difference for our purposes. Hit ok to close the window and ignore the warning it gives you if you changed anything. Right click the AnyDVD icon in your system tray (the far right side of the Windows taskbar) and select “Rip Video DVD to Harddisk.”

It will ask you where you want to save everything, so pick a directory and hit “Copy DVD.” It will (again) remind you that you are using a trial version. Hit “Continue” and it will start copying the files. It is basically just copying over everything on the HD DVD, but it is also removing the encryption so that other software can actually use the files. For instance, if you try the next step without first using AnyDVD, it will read the HD DVD just fine, but will warn you that it can’t do anything with it until you decrypt it. Everything would be so much easier if we didn’t have to worry about copy protection…

Once AnyDVD is finished (it’ll probably take about 20-30 minutes), open up RipBot264. When you run RipBot, it scans your computer to make sure you have all the libraries installed. Assuming you already took care of that, the first window you will see is the queue window. The queue is nice because you can put a bunch of movies in the queue and just let the program encode them all one after another instead of you setting them up one at a time. HandBrake also has this feature, but we didn’t use it in the guide. Anyway, click “Add” in the lower right corner and you will be presented with a new window that will allow us to configure lots of options about our encoding, most of which we will be ignoring. Click the “…” button next to the video field. A browse window will pop up. Navigate to the directory created by AnyDVD (it’s probably the name of the movie). Open up the HVDVD_TS folder (for HD DVDs) or the STREAMS folder (for Blu-rays). This folder contains all the video files for the movie, but we are looking for the main feature. On HD DVDs, this is usually named FEATURE_1.EVO or PEVOB_1.EVO (the number is there because it is also usually split into two files); on Blu-rays, the extension will be .m2ts instead of .evo, but I’m not sure what the name will be (all of the guides I can find are exactly the same). For either format, you are basically looking for the largest file (since the feature will be the longest video). If it is split into two files, select the first one and hit “Ok.” It will analyze the file for a couple seconds, then present you with a couple options. The first, the “Playlist,” shows you the files you will be encoding. If the feature is split into two files, you should see that both of the files are part of the active playlist. Under “Chapters,” you can tell it to include chapter information or to ignore it. Under “Video,” you can tell it not to include the video in the encode, but that seems counterproductive for our purposes. Under “Audio,” you can select the audio stream. Some movies have both Dolby Digital Plus and Dolby TrueHD; it’s up to you which one you pick, but the TrueHD option will result in a larger file size (though the audio quality should be better). You can also select whether or not to include subtitles, but I don’t think there is a way to turn them on and off easily while streaming, so I recommend not including them unless you need them. The most important option here is the checkbox for “FLAC” above the audio selection (circled in the picture below). Check that box. Doing so will enable you to directly copy the audio stream rather than compressing it during the encoding process, resulting in better audio. However, if you don’t have a receiver that accepts 5.1 Linear PCM signals (and thus an HDMI input), you’ll need to uncheck the “Keep DTS audio in stream” option in the PS3 Media Server. Yes, that means that the server application is transcoding the audio, resulting in a lower quality signal, but if you upgrade your receiver later, you won’t have to re-encode your movies for better audio. Update: The reason the receiver needs to be able to decode Linear PCM instead of, say, the actual TrueHD or Master Audio stream is that the PS3 doesn’t fully support those codecs and has to decode them internally, so it sends them to your receiver as 5.1 Linear PCM. However, the new PS3 slim may support TrueHD and Master Audio streaming (though your receiver will still need to support those). That was a lot of talking without any pictures, so here’s a picture of all those options to help you understand:

Alright, now that we’ve got all that squared away, click “Ok.” RipBot will take some time to Demux the files. Don’t worry if you don’t know what that means. I don’t either. Basically, it’s just going through the files and figuring out what’s in there. When that’s finished, you’ll see our original list of options, but this time you can actually change some of them. First, at the very bottom, select .MKV as your format and browse to where you want to save the file. Make sure the “Profile” (located under the video selection) is set to “[High 4.0] HD, BluRay, Consoles” (I’m pretty sure it’s set that way by default). Below that, you will see options for “Mode” and “CRF.” You can leave “Mode” set to “CQ,” but you’ll want to set the “CRF” to 18. “CRF” is basically how much compression will be applied to the video. The larger the number, the more compression, so if we want better quality, we want to use the lowest number. That will result in a larger file size, but what’s the point of HD video if you’re settling for lower quality? The “Properties” button will allow you to configure the encoding even more, but you shouldn’t need to and I have no idea what the options mean. You can also set the “Mode” to “2-pass,” which will enable you to select the bitrate for the video encoding so you can get an even better quality video. Personally, I have found “CQ” to be just fine. Under the audio half of the window, you’ll see another “Profile” option. Here is where you can select whether you want RipBot to compress the audio or simply copy the stream. If you didn’t select the FLAC option in the previous window, you won’t be able to select the copy stream option with the MKV format, which we are using. Personally, I like to select “x.x COPY STREAM,” which just copies the audio stream available on the DVD, thus resulting in no quality loss, but you can also have RipBot compress the audio, allowing you to leave the “Keep DTS audio in stream” option enabled in the PS3 Media Server utility. Finally, you’ll want to turn the “Normalize” option to “OFF.” Normalizing basically just makes everything louder, but I don’t like things altering my audio signal, so I turn it off. If you notice that your videos are significantly quieter than when you watch straight off the disc, you might want to set it at 100%, but I think they’re about normal with it off. Here’s how your options should look:

Ok, now you just have to hit “Done” and it will add the encode to the encoding queue. You probably want to uncheck the “Low Priority” option. If you leave it checked, RipBot will use fewer system resources, but it will also take longer to encode. You can add some other movies to the queue if you want, but it takes about 10-12 hours for each movie (on my machine, which is pretty fast). When you’re ready, just hit “Start” and let it run. When it’s finally finished, you have HD movies ready to stream to your PS3 or watch on your computer!

That wraps up my guides. If you’re confused about something or think I left something out, please let me know and I will update the post.

[part 1 (streaming)]

This part of the guide focuses on ripping DVDs to your computer for streaming to your PS3. You can also watch the videos on your computer, but most of the steps here are unnecessary if you only want to watch that way. These steps will leave you with a PS3-compatible video file. If you want to watch the video on your computer, you will likely need a good media player like VLC–the default players in most operating systems simply don’t have the right codecs.

Before we begin, you’re going to need some software. For all platforms, you will need HandBrake. If you are using Windows, you will also need DVD Shrink or a similar DVD decryption tool like Slysoft AnyDVD (we will be using AnyDVD HD later for HD DVDs and Blu-rays). I happen to like DVD Shrink best because it’s easy to use and allows you complete control over the what you copy over from the DVD, but it doesn’t work with some copy protection on some DVDs (I’ve noticed it most with Sony DVDs). If you’re using a Mac, you don’t need anything other than HandBrake. HandBrake is also available for Linux, but you may need additional software to decrypt the DVDs first. As a final note, remember that these procedures are only for DVDs you legally own. I do not condone illegal copying.

After you’ve installed the software, pop in a DVD and, if you are on Windows, open up DVD Shrink. HandBrake doesn’t decrypt DVDs on Windows, so we have to go through a couple extra steps first. If you’re on a different platform, hold tight while we get through decrypting. Let’s change some settings before we start ripping DVDs. Here’s how I have my settings:

I think most of those settings are the defaults, but it doesn’t hurt to make sure we’re on the same page. You can probably enable burning with Nero if you want, but I don’t have Nero, so there wasn’t any point for me to do so.

Now that are settings are set, click “Open Disc” and select your DVD from the drop-down menu. Hit ok and it will start analyzing the DVD. Once that’s done, you’ll see the main DVD Shrink window again, this time populated with a lot of options. We don’t need all the menus, so we’re going to reauthor the DVD. Click “Re-author” and you will see that the left pane is now empty. You want to drag over the main title (the main movie, as opposed to the extra features) from the right. It will be listed under the “Main Movie” section, like this:

In this case, there is also a “Title 2″ under “Main Movie,” which could be a set of alternate angles or something. Ignore it; we only need the original version. Click the “Compression Settings” tab and you will see a list of languages for both the audio and subtitles. DVD Shrink is very nice about telling you what language each audio file represents. Uncheck all of the things we don’t need, like this:

Make sure the top option is set to “No Compression,” as we want to keep the video at the highest quality possible. Click “Backup!” and a window will pop up. You shouldn’t need to change much, but tell it to save it to a folder and where to save that folder, like so:

Your settings should be all set from earlier and most of the other settings can’t be changed now anyway (most of the settings available here have to do with compression and we aren’t compressing). Hit ok and wait for it to finish (it could take a while). I recommend that you not do anything else on your computer while DVD Shrink is doing its thing. I have had problems with videos skipping when I try to play them later if I try to do much else while DVD Shrink is working.

If you aren’t using Windows, you can join us again. The next steps apply to everyone. Open up HandBrake. If you’re on a Mac, it will immediately prompt you to choose your video source, so select your DVD and hit ok. It’ll take a couple minutes to analyze the DVD, much like DVD Shrink did, before you can select options. On Windows, click “Source,” then “DVD/VIDEO_TS folder.” Find the folder you just created with DVD Shrink and hit ok. We’re going to need to change a bunch of settings. Start by selecting the PS3 preset on the right. The presets menu may be hidden if you are on a Mac; if it is, click the button to show it and select the PS3 preset. Under “Destination,” click “Browse” and navigate to where you want the final video file to be stored. Enter a name for it and hit ok. Now, under “Output Settings,” change the format to “MKV file.” As I understand it, the MVK format has the best support for AC3 audio, which is what we will be using. Under the “Video” tab, you may wish to enable “2-pass encoding,” which should–theoretically, at least–give you better quality video, but it takes longer and you may not notice any difference anyway. I have it enabled, but I haven’t actually tried leaving it disabled, so I don’t have much in the way of comparisons for you. The most important setting is under the “Audio & Subtitles” tab. On Windows, change the “Audio Codec” option to “AC3.” This leaves the original audio intact, preserving the surround sound that came on the DVD. Technically, you could get surround with a different setting, but Dolby Pro Logic II isn’t as good as having discreet channels like you do with Dolby Digital. On Mac, you have to enable AC3 passthru by selecting “AVC/H.264 Video/AC-3 Audio” from the codecs drop-down menu, next to the “MKV” option we selected earlier. Now you can go back to the “Audio & Subtitles” tab and make sure that “Track 1″ shows “English (AC3) (5.1 ch)” and that “Track 1 Mix” shows “AC3 Passthru.” Here are pictures of what your final settings should look like (Windows first, then Mac):

Now just click “Start” at the top and wait for it to finish! On Windows, a command line window will pop up showing you how far along the encoding is; on Mac, you’ll just see a progress bar at the bottom of the HandBrake window. The encoding process can take a while, so you probably don’t want to sit around waiting.

That’s all there is to it! You should now be able to access the movie files you created from your PS3. In part 3, I’ll show you how to put all your useless HD DVDs on your computer.

[Continued in part 3]

There is a lot of information out there about how to stream media from a computer to a PS3 or Xbox 360, but most of it is scattered across several web sites and doesn’t cover all the steps. Even when I found the right information, a lot of it was geared toward more experienced users, leaving me to do some experimenting until I got things right.  This guide aims to collect all the information a put it in one location with steps that are as newbie friendly as possible. With my guide, you will learn how to:

• Rip DVDs to your computer
• Rip HD DVDs  and Blu-rays to your computer
• Encode videos to a streaming-friendly format
• Stream video from your computer to your Playstation 3

Before we begin, let me say that I do not condone illegal copying of movies. This guide is intended for use only with movies that you legally own.

Why would you want to bother setting up streaming? That’s a good question. It takes a long time to rip all your movies to your computer, especially HD movies. However, there are definitely some advantages. If you have a lot of movies, they take up a lot of space in your entertainment center. If you put them all on your computer, you can put them all in a box and put them out of the way. On top of that, you will have easy access to your entire library without having to leave your couch to put in a disc.

Why bother streaming when the PS3’s internal hard drive is so easy to upgrade? Well, unless you have an extra 2.5″ hard drive sitting around, it costs money to upgrade the PS3’s hard drive. Chances are, you already have a big hard drive in your computer, so streaming doesn’t cost you anything. Also, the PS3 is kinda picky about how videos are encoded, but those limitations can be overcome by streaming, which automatically transcodes videos so that they are compatible. It is much easier to set up videos with surround sound for streaming instead of storing them on the PS3’s internal disk.

Why not use the Xbox 360? Personal preference. I’m not a fanboy, but I already use the PS3 for movies, so it just makes sense to use it for movie streaming, too. It also supports a larger variety of formats, though I could be mistaken about that.

Now that all the questions are out of the way, let’s get started. I will be using a PC with Windows 7 for this guide, but most of the steps are identical on a Mac since the software I use is compatible with both. I will try to point out the differences as they come up. The last part of the guide, the part about ripping HD movies, will not work with a Mac. The software used for that is all PC-only.

The first thing you are going to want to do is download PS3 Media Server. This utility works on Windows, Mac, and Linux, and it is very easy to set up and use. It’s supposed to work as a Windows service as well, but that option doesn’t seem to work very well, so I don’t bother with it. It’s easy enough to just run it when you need it or to set it to run when you log in. One thing to note is that if you rip movies that start with “the,” such as “The Matrix,” you might want to name them like this–”Matrix, The”–to keep them sorted alphabetically. After you’ve installed it, you’ll want to play with the settings a bit. Here’s how I have my settings. Under “Navigation/Share Settings:”

The most important things to set on this page are your shared folders at the bottom. Make sure to add whatever directories you want to share with the PS3. I have it set to share music, but Windows does a good enough job of that by default, so I will probably remove that directory. I don’t know if it’s really necessary to use MPlayer for thumbnails, but I changed it to that when I changed the other thumbnail settings and it seemed to work better, so I left it. I find that 120 seconds (2 minutes) is a good number because it is far enough into most movies that you’ll actually get a thumbnail that you can recognize as belonging to the movie. I also like to have the extensions and engine names hidden so that I don’t have long titles (like “The Matrix.mkv [MEncoder]“) showing up on the PS3. I find it is easier to find things when I only have to see the names.

Next, you’ll want to check the transcoding settings. I don’t think I changed much under that tab, but just in case, here are the settings that I use. Under “Common transcode settings:”

I like audio, so I made sure it was set up for maximum quality and full 5.1 channels. If you choose to do the copy stream option later when we are ripping HD DVDs, you’ll want to uncheck “Keep DTS audio in stream” unless you have a receiver that can decode 5.1 Linear PCM (which requires an HDMI input). Update: The reason the receiver needs to be able to decode Linear PCM instead of, say, the actual TrueHD or Master Audio stream is that the PS3 doesn’t fully support those codecs and has to decode them internally, so it sends them to your receiver as 5.1 Linear PCM. However, the new PS3 slim may support TrueHD and Master Audio streaming (though your receiver will still need to support those). The only other settings I might have changed are under the “MEncoder” settings:

I checked the “Enhanced mutlicore support” setting (since I have a dual-core processor), though if you hold your mouse over the option, you will notice that it may not work perfectly all the time. I haven’t had any problems with it so far, so I’m leaving it checked for now.

And that’s it! Just hit “Save” and close the window. Closing the window leaves the program running in the background (accessible from the system tray), but hitting “Quit” will actually quit the program, so you won’t be able to take advantage of streaming. If you turn on your PS3, you should see a “PS3 Media Server [your PC name]” under any of the media sections (“Video,” “Music,” and “Photo”). If you don’t, make sure that UPnP is enabled in your router’s control panel. The process for enabling that varies from router to router, but on my Netgear, it is under the “UPnP” category. You may also need to enable network sharing on your computer, as detailed here. On Windows 7, the process is mostly similar. Go to the Network and Sharing Center, as detailed in the link, click “Choose homegroup and sharing options” and check the option for “Stream my pictures, music…[etc]” under “Share media with devices.” If you still can’t get it to show up on the PS3… then I have no idea what’s wrong.

In the next installment I will show you how to rip standard DVDs to your computer and encode them so that you can stream them. Don’t worry, it’s a lot easier than it sounds.

[Continued in part 2] [Skip to part 3]

I don’t think this has really been attempted yet, but I think it would be a great use of augmented reality. There are all kinds of ways to play D&D online: IM, text-based online options, actual D&D games… but most aren’t quite like the real experience of sitting around with some buddies. What if everyone had a web cam? There would be no way to move figures around on one unified board. That is, unless we take advantage of augmented reality. Imagine if the DM simply had to program the simple grid on the computer (not so different from drawing a map with pencil and paper) and each player had a figure that, when moved around in front of the web cam, would cause a representation of that figure to move around on the digital board. It would be a perfect solution to long-distance tabletop gaming. I wish I knew how to program it…

Today I finished my extremely ghetto car mount for my new iPod Nano:

Yes, that’s right, it’s bright orange and mounted with wires. It matches the outside of my car. It’s also about the only color paint I had lying around. And yes, that is a sticker from Wal-Mart.

I got sick of the vent-mounted holder I had before always falling off, so I wanted something a little more secure (while still being non-permanent). I made the actual holder out of a soft wood I had lying around by routing it with my Dremil. Routing is a real pain, so if you want to try something like this, I recommend routing very thin layers at a time to avoid frustration. The connector is attached with a zip tie, which serves the second purpose of holding in the tabs that would normally lock the iPod in place. As for attaching it to the vent, I went with the simplest solution: cut two strips of solid wire that would keep its shape and wrap it around some screws on the holder. It works pretty well, though I suspect it will bounce around a bit on the road. As long as it doesn’t fall off, I don’t care.

Retrospective look at the project:

• I hate routing, but it isn’t as bad if I work in thin layers.
• Because I tried routing a lot at once, I ended up with some rather rough areas that required me to cut the opening larger than I would have liked to fix my mistakes.
• Poking holes with an awl is a stupid idea with thin, soft wood. The wood started splitting, but hopefully the paint and clear coat will help keep it together.
• The mount is a very single-purpose project. Anyone with a different iPod can’t even use the connector.
• Had I been less lazy, I probably would have gutted an old car outlet plug (so it doesn’t actually use up the car battery) and attached the holder to that somehow.

Luckily for me, I won’t need my car for much longer, so it really doesn’t matter how crappy the mount is as long as it works.

I was invited to join Google Voice (GV) a couple days ago, so I thought I’d share my reactions to it so far. I’ll admit that I don’t use it very often (or at all, really), but there are a couple of problems I have noticed in my limited usage.

• You can’t use your existing number. Everyone knows that already and Google is said to be working on it. The biggest problem with a new number is not just that you have to tell everyone about it, but also that no one gets free calling or texts with you. Most of the people I call and text are on the same network, and while it’s not a big problem for me (I don’t talk much and I have unlimited texting), I imagine it might be a bigger problem for others, including my friends who text me and don’t have unlimited texting outside of our shared network. If/when they figure out number porting, that would solve that problem as well as the problem of having weird numbers to send texts to and the extra steps associated with dialing.
• No voice recognition for dialing. It’s one thing to have to dial in to your number to call someone else using it, but it’s another to have to actually enter in the number. I imagine that a lot of people these days are like me and don’t bother to memorize phone numbers, so that’s a problem that could easily be solved by Google’s voice recognition software they already use for Goog-411.
• When you receive a text, it starts with the contact’s full name so that you know who it’s from (because otherwise, they are given a weird number you won’t recognize). It would be nice if Google Contacts would let you specify a nickname for each of your contacts so that you don’t waste valuable text characters (because if it’s a longer text, it’ll probably spill over to a second text) on a contact’s full name. I suppose you could just remove last names from all your contacts, but that seems counter productive.
• Texts are left as “unread” in your online inbox even after you have read them on your phone. I know there is a way for phones to communicate with one another as to whether or not a text has actually been opened, so I hope there is a way for Google to integrate that into their system.
• Domestic long distance isn’t free. Most mobile providers include domestic long distance, but Google charges for calls to Alaska and Hawaii. Come on, Google. Easy fix.

Again, I haven’t used it too much, but I’m pretty sure those are issues without real solutions at the present, at least not for those of us with “dumb” phones.

Dear craigslist.com buyers,

When you send me an e-mail asking about my item and I send you a reply, it is only proper for you to send me a reply indicating whether you actually intend to buy the item or not. As a seller, it is very frustrating when we receive e-mails that seem to go nowhere. Did you even get the e-mail? Is my account suddenly not working? So please, next time you try to do business, be courteous.